Double Glazing Door Locks
Many homeowners opt for double-glazed windows and doors for their energy efficiency, insulation and sound reduction. But, they also serve as an effective deterrent for burglars.
To ensure the security of your double glazed windows, check that they are equipped with anti-jemmy hinges. These specialised hardware parts make it difficult to get the sashes of your windows open.
Multi-point locking
Multipoint door locks can be one of the most efficient security devices that you can put in your home or office. They are almost impossible to break or pick, and can be a great addition to any security system. RepairMyWindowsAndDoors can improve your energy efficiency, by reducing drafts around the doorframe and improving the seal.
Multi-point locking systems are comprised of a deadbolt and a live bolt (latch) paired with hook bolts above and below the latch, and flush bolts that secure the head and sill of the door frame. They usually extend across the entire width of the door at least. These systems are referred to as "full-width" in commercial contexts. They protect the entire opening of the door.
Multi-point locking is available on the majority of uPVC and some doors made of timber. This type of lock offers an increased level of security than standard locks and will often be included in a police-approved Secured by Design initiative for new construction homes.
When a multi-point lock made of uPVC door is shut, the outside handle will activate the latch bolt. The inside handle is locked by turning the lock's thumbturn inside, with the door handle raised or by using a key. Always use a key to lock your door. Utilizing handles to lock the door can cause damage to the latch or deadbolt.
If your uPVC lock isn't functioning correctly, it could be that it is not aligned with the door frame. You can test this by placing a spirit level on the top of the door and checking for any gaps in the miter joints where the frame connects to the door.
It's worth asking your double glazing expert whether there's a gap and to fix it. They'll be able to replace the lock on your behalf or fit a replacement. They'll know whether the issue is caused by damage to the frame or the lock unit itself. In these instances the technician will be able repair or replace the multipoint lock in order to get it working again.
Espagnolette locks
Espagnolette locks have become a common locking mechanism for double-glazed uPVC windows. They are easily recognised by their flat strip design that rotates when you turn the handle. They work in conjunction with the secure multi-point locks that are positioned around the frame to lock and unlock your windows. If you're seeking to improve your uPVC windows, espagnolette handles are an ideal option for new builds or renovations. They are available in a wide selection of styles, from modern and traditional. They also offer many bar sizes backset options, mushroom cam heights and a variety of profiles to suit any need.
The espagnolette lock is a well-liked option, but it has been criticized for offering the lowest level of security for French doors. The single point of locking in the middle of the door could be overcome with enough force. It is also possible for burglars to open French doors by bending the handle to the left or left. These types of doors are often used as the principal entrance to your home and must be secured to reduce the chance of unauthorized entry.
In spite of their name, espagnolette locks are not a bolt they are actually a one-piece mechanism that can be mounted externally on the outside of your French doors or inside a frame for a casement window. The mechanism is operated via a handle and comprises of a rod with hooks at the head and at the sill that fit into sockets in the window frame. When the window's handle is turned on the rod is moved upwards and downwards. The hooks are then locked into their receivers.
These are an excellent solution for those looking to enhance the security of French doors without compromising the appearance of the door. These handles can be utilized in different styles and are able to be master-keyed for extra security.
Similar to cockspur handles espagnolette handle designs come in both cranked and inline models to fit the shape of your window. Inline versions turn the same way as the original handle, whereas cranked versions are available in left and right handed versions.
Laminated glass
It is used as windows because it is very hard to break. It is also more secure than standard safety glass as it is fused together into a single piece rather than breaking into sharp shards. This makes it ideal for residential and commercial buildings.
Lamination is the process of combining two pieces of flat glass and an interlayer of plastic. The entire piece is heated and pressed to make it strong enough to function as a door or window. The laminated glass that results is up to five times stronger and one hundred times more rigid than the glass that has been tempered. It also withstands greater impacts and is resistant to weathering.
This type of glass is perfect for buildings that must perform well, like enhanced safety (impact-resistant glass), UV protection, or noise reduction. Laminated glazing can be combined with a high-performance coat to improve thermal insulation as well as solar control. It is available in a wide range of options to suit your budget and project.
Laminated glass is safer to use than tempered glass because it is able to be cut even after production. It is also less likely to break when cut from the side rather than the edge of the glass. This makes it a great option for glass that cannot open or close, like cellar windows.
It is also utilized in high-rise buildings in urban areas because of its ability to reduce the volume of noise that is transmitted from the street to the interior of the. The Saflex PVB interlayer within the laminated glass is also able to block some of the sun's harmful UV rays, preventing discolouration of furnishings and fabrics.
While laminated glazing is generally more expensive than glass that is tempered, it has many advantages that can save you money over the long term. It's also more durable, resistant to abrasion and scratches, and can be made according to your specific requirements. In addition, it's less susceptible to heat damage and is a great option for high-rise and coastal areas. Certain building codes require that exterior doors and certain windows inside are made of laminated glass.
Friction hinges
Friction hinges are designed to support and hold the positions of doors or flaps, panels and windows. They can also resist the motion of other hinges and prevent the slamming of a heavy object or accidental opening and closing. They come in different dimensions and shapes, and can be equipped with a variety torques. These forces determine the length of time that hinges remain open or closed.
Aluminum is a fantastic material for friction hinges due to its high strength-to-weight ratio as well as its durability and corrosion resistance. It is light and easy to handle. It's also available in different finishes, and is easy to install and fix. Another popular material for friction hinges is brass. Brass is an alloy of copper and zinc, and it is naturally resistant to corrosion. It is also stronger and more durable than steel, however it is more expensive.
The hinges made of friction used in uPVC double glazing door systems can be tailored to the specific requirements of the particular application. These customizations may include the amount of damping, the viscosity of lubricant and the amount of tolerance to space between components, as well as the environmental conditions where the hinge is used. These variables can affect the dynamic torque of the hinge and it is crucial to monitor this metric for critical applications.
There are various kinds of friction hinges such as detent and one-way. Detent friction hinges don't have torque in the opposite direction. Other variations include disc, curl and pipe friction. Each type of hinge is unique and has its own set of properties, which make it more or lesser useful for specific applications.
Friction hinges are also referred to as hinges that stop free because they permit a door or lid to remain at an angle even after the force has been removed. This helps prevent injuries through accidental closing. This kind hinge is perfect for use in tough, medical or hazardous areas. The hinges are able to be designed to allow different levels of free play and can be made to work in a range of angles.